Protec offers you the only line of industrial dehumidifers specifically engineered and manufactured for corrosion protection, marine/facility mothballing and inventory preservation. Protec’s high capacity, desiccant rotor design delivers the specifed amount of dehumidified air at the lowest possible energy cost. Eight Protec dehumidifer models allow you to select capacities ranging from 75 scfm to 9000 scfm. Protec dehumidifers have been used in the field in a wide array of applications and for a challenging range of applications during the past 20 years. Many Protec dehumidifers have provided more than 15 years of continuous service.
Proven Applications:
• Aircraft Storage
• Ammunitions Storage
• Asset Protection
• Building Dehumidification
• Cargo Protection
• Condensation Prevention
• Corrosion Protection
• Document Preservation
• Electrical/Electronic System Protection
• Equipment Warehousing
• Facility Mothballing
• In-place Equipment Protection
• Inventory Preservation
• Marine/Naval Mothballing
• Marine Maintenance
• Mold/Mildew Protection
• Parts Storage
• Plant Lay-up
• Pre-Sale Equipment Warehousing
• Vehicle Storage
• Weapons Warehousing
|
|
Rotor Technology:
Continuous non-cycling performance. Maximum transfer of water in vapor phase. Inert structure, non-corrosive, solid desiccant, non-metallic.
|
 |
|
|
Protec Model 1125 Desiccant Dehumidifier Offers Unmatched Features
Capacity: Process air flow rates of 600 to 2250 scfm. Nominal moisture removal of 30 lbs./hr. @75°F/50%RH @1125 scfm.
Desiccant Options:
Titanium silica gel, lithium chloride, and molecular sieve options provide efficient operation for any application.
Contact Air Seal System:
Separate process and reactivation air streams at pressures up to 8" W.G., with 5-year life expectancy.
Reactivation Options:
Modulating electrical, steam or gas reactivation.
Low Temperature Operation:
Functions effectively to –55°F. Will not ice-up like refrigeration-based dehumidifiers.
Durability:
Welded aluminum housing, durable polyurethane finish, weather-tight access panels. Heavy-duty blowers, drive controls, and electrical components. Suitable for indoor and outdoor use.
Electrical Controls:
Continuous automatic operation, including motor starters, overload protective devices, microprocessors with indicating lights and fault circuits. All wiring to NEC codes.
Drive System:
Simple, self-tensioning belt drive arrangement with few moving parts.
Environmentally Friendly:
Uses no toxic materials, creates no hazardous bi-products.
Easy Maintenance: Quick access panels, roll-out rotor replacement, life-time drive lubrication, easy duct connections, replacement parts readily available and simple maintenance procedures.
Options
• Humidistat Control
• Moisture Margin™ Control
• Watch™ Monitoring System
• Pre/post Air Treatment
• Internal Process Air By-pass
Specifications*
• Process Air Volume: 1125 scfm
• Maximum Reactivation Air Volume: 400 scfm
• Nominal Moisture Removal: 30 lbs./hr. @ 75°F/50%RH and 1125 scfm
• Utilities: 208, 230, 460 or 575 volts, 3-phase, 60 Hertz (also available with steam or gas reactivation)
• Unit Amp Draw: 460/3/60 FLA 38.3
• Contact Air Seals: Separate process and reactivation air at pressures up to 8" W.G. with 5-year life expectancy
• Filters: Permanent and Washable
• Manufacture: ISO 9001 Certified
Suggested Specification Guide
Dehumidifier shall be of a type proven in satisfactory operation for a minimum of ten years. Dehumidifier shall be of the non-cycling sorption type with a single desiccant, rotary structure. The casing shall be fabricated as a unitized body with welded aluminum construction for maximum strength and durability.
Suitable access panels on both sides of the unit shall allow access for inspection or servicing without disconnecting ducting or electrical wiring. Airflow balancing dampers to be furnished. The dehumidifier shall be designed for continuous operation.
The rotary structure shall be a monolithic fabricated extended surface composite consisting of inert silicates reinforced with uniform diameter glass fibers for maximum strength. The fabricated structure shall be smooth and continuous in the direction of air flow without interruptions or sandwich layers which restrict airflow or create a leakage path at joining surfaces. Desiccant shall not channel, cake or fracture due to repeated temperature and moisture cycling. The materials of construction shall be non-toxic.
Design shall be modular in approach to readily allow connection to accessories such as face and bypass, pre- or post-cool modules.
Electrical components shall be UL/CSA recognized and wiring methods in accordance with the latest edition of the National Electrical Code. Power supply shall be ___Volts/3Phase/___Hertz.
Full face contact pressure seals shall be provided to separate the process and reactivation airstreams and eliminate detrimental leakage of air or moisture with static pressure differentials of up to 8" of water gauge.
Dehumidifier shall be factory assembled, fully automatic, complete with laminar flow desiccant wheel, reactivation heaters, reactivation energy control system, roughing filters, motors, fans, non-ratcheting desiccant rotor drive unit, automatic controller and all components’ auxiliaries. Dehumidifier shall be functionally tested at the manufacturer’s factory and shipped complete with all components necessary to maintain normal operation.
*Continual engineering and research product improvement may result in design and specification changes. Consult Protec for certified technical data. |
